Make one. There are non conductive potting resin epoxys in the electronic world that can be used in a mold. You could actually make a primative, yet effective switch in the likeness of the original ceramic switch out of wood for pennies on the dollar. All you would need for hardware is some brass screws, nuts, fiber washers, small spring with retainer, small brass strips. Then all you have to do is bolt it in with the right wires soldered to the right places. Hey...the switch may not snap through the original switch hills and valleys, but the contacts are the key for variable speeds .  Attached Image (viewed 76 times):
 Last edited on Sat Jun 27th, 2009 06:56 am by Russ Huber
|
