I am offering this GE Kidney Oscillator Housing for sale. The housing was broken in 2 areas. The lower housing was broken at the mounting holes, as are most Kidney Housings. The upper Housing had a small piece broken away, which I replaced, and a small area adjacent to this was missing. To repair these areas, I bead blasted the entire housing, cleaned it thoroughly using Lacquer Thinner and applied JB Weld. After fully cured, I filed, and sanded all areas to blend in with the surrounding metal. I feel the upper housing will work as repaired since there are not other visible breaks. I am unsure of the lower housing given the areas that were broken. They all appear to be strong repairs.
SOLD!
Attached Image (viewed 91 times):
 Last edited on Tue Oct 27th, 2009 09:18 pm by John Fengel
|
